How to Make Dollhouse Clapboard Siding

Things You\’ll Need

  • Shirt cardboard or thick poster board

  • Utility knife and replacement blades

  • Cutting mat

  • Wooden coffee stirrers

  • Unfinished wooden craft sticks

  • Wooden tongue depressors

  • Paint sticks or old yardsticks

  • Band saw with 24-raker blade

  • Clear craft glue or contact cement

  • 1/4-inch, 1/2-inch, 1-inch and 2-inch paintbrushes

  • Utility knife

  • Stain (optional)

  • Bricks or concrete pavers

... You can make scale-model clapboard dollhouse siding from tongue depressors and other thin wood.

The scale of your dollhouse matters when selecting materials to make clapboard siding for your dollhouse. Wooden coffee stirrers, craft sticks and tongue depressors all make good clapboard, once you trim the round ends and decide whether or not to stain, weather or paint them. The soft wood used to make these sticks cuts with a utility knife or razor blade, using just a little pressure, but you need a cutting mat to avoid damaging your work surface.

Video of the Day

Step 1

Make templates for each wall of your dollhouse from sheets of shirt cardboard or thick poster board. Cut the poster board or shirt cardboard to the length and width of each wall.

Step 2

Sketch the positions and correct dimensions of any doors or windows onto the templates. Use a utility blade to cut away the cardboard covering the door and window openings.

Step 3

Select the material whose width and thickness best match the scale of your dollhouse. Use craft sticks, for example, on a 1:12 or 1-inch scale dollhouse. According to, 1-inch scale means that every inch in the dollhouse represents 12 inches in real life.

Step 4

Use tongue depressors, paint sticks or lengths of yardstick for playscale dollhouses, where 2 dollhouse inches equal 12 inches in real life. Use coffee stirrers for 1:24 — also known as 1/2-scale — dollhouses.

Step 5

Create 90-degree angles at the ends of each coffee stirrer, craft stick, tongue depressor or paint stick by cutting off rounded portions using a band saw with a 24-raker blade.

Step 6

Lay your dollhouse wall template on your work surface in front of you, with the "foundation" edge facing you and the "roof line" edge facing away from you.

Step 7

Brush a line of clear craft glue or contact cement along the foundation edge of your dollhouse template, using whichever paint brush best matches the width of your clapboard material. Use a 1/4-inch-wide paint brush, for example, if you are using craft sticks, a 1/2-inch brush for tongue depressors and a 1-inch brush for paint sticks or yardstick sections.

Step 8

Press the first clapboard into position, with the foundation edge of the clapboard flush — which means even — with the foundation edge of the template.

Step 9

Dip your brush in glue and place it so that half its width falls on the template and half its width falls on the first clapboard. Brush glue the full length of the top half of the first clapboard and half a clapboard's width above it on the template.

Step 10

Press the second clapboard into position on top of the first one, overlapping the top half of the first clapboard by half its width.

Step 11

Repeat applying glue and pressing additional clapboards into place until you reach the roof line, ignoring the window and door openings for now. Adjust the final clapboard so that its edge falls flush with the roof line.

Step 12

Allow the glue to dry overnight.

Step 13

Turn the clapboard walls template-side-up. Score around the inside edge of each door and window opening with a sharp utility knife, just enough to leave a visible line.

Step 14

Repeat scoring around the openings, making the cut a little deeper each time, until you cut all the way through the clapboards.

Step 15

Turn the clapboard wall over and reapply glue to any clapboards that loosened while you cut the door and window openings.

Step 16

Apply stain to the clapboard side of each wall, if desired. Brush the template side with water to ensure that the walls will not warp due to the uneven moisture level on the clapboard side.

Step 17

Lay bricks or concrete pavers on top of the wall sections while they dry, to prevent warping.


This method allows you to make clapboard "walls" that can be applied to the exterior of an existing dollhouse in one single sheet. The cardboard template provides a surface for each clapboard to adhere to. It's easier to trim the window and door openings while the wall is flat on the table, and all the clapboard goes up at once when everything has been stained, trimmed and dried.

Related Stories


Caught in the Middle

Caught in the MiddleHelp for the Sandwich Generation- Twenty million American adults are caring for aging parents at the same time they\'re raising young children. Known as the Sandwich Generation, the

The Importance of Senior Fitness

The Importance of Senior Fitness- According to the National Institutes of Health (NIH), exercise and physical activity are some of the best things older adults can do to stay healthy. Even moderate ex

Grandparent Getaways

Grandparent GetawaysTrips to take with your grandchildren- \"No parents allowed.\" It\'s not a sign on a kid-only clubhouse, it\'s the first rule of travel for memory-making grandparent/grandchild vacatio

Comfortably Aging in Place

Comfortably Aging in PlaceHaving lived in the same ranch house for 55 years, John Heck’s grandparents wanted to make any and all necessary accommodations to allow them to peacefully age in place. Usin

Aging with Vitality, Grace and Confidence

Aging with Vitality, Grace and ConfidenceIt’s one of the great ironies of life: Your reward for surviving the tumultuous teen years, establishing a career and nurturing a family culminates in dry skin

3 Ways Seniors Can Control Prescription Costs

3 Ways Seniors Can Control Prescription CostsFor 55 million Americans enrolled in Medicare, the New Year means any new Medicare Advantage or prescription drug plans, or any changes to your existing pl

Popular Categories